Owner's Manual
Table Of Contents
Photo 13 (S01) Photo 14 (S02)
Photo 15 (Battery voltage)
(1) Ensure your inverter is connected with a battery
successfully.
(2)
Turn off the inverter.
(3)
Press and hold the
ON
/
OFF
switch for 5 seconds.
You
will
see
the digital display flash "
S01"
twice
(Photo
13)
, then flash
11
S02
11
three times (Photo 14).
Finally, it
will
show
the
voltage of
the
battery
(Photo
15).
(Do
not let go of the
ON
/
OFF
switch until you see the
digital display show the battery voltage.)
(
4)
This means the passcode has reset back to "8888
11
successfully.
17