Owner's Manual

TROUBLESHOOTING
PROBLEM: No Input Voltage
cause Solution
Battery is defective Replace battery.
Blown fuse Ask for help from technician.
Lose cable
Check the connection to the battery.
connections
Tighten as required.
PROBLEM: Inverter Shut Down
Cause
Solution
The actual output power
is higher than rated Reduce load to have the
power of inverter, actual output lower than rated
Overload protection
has occurred
power of inverter.
The actual output is less
Use a product with starting
than rated power, but
surge power within the
high starting surge has
inverter's capability.
caused overload shutdown
The voltage input is
too low
Charge the battery.
Disconnect the inverter from
Inverter is overheated
battery or DC socket and allow
due to poor ventilation
to be cooled for 15 minutes.
and has shut down
Please ensure to remove
objects covering unit.
Test inverter using the enclosed test cables.
Voltage drop should be no more than 0.5V using
the highest rated appliance
If voltage drop is higher than 0. 5V , increase cable gauge size.
~