Please read this manual thoroughly before installing and operating your Inverter. This manual contains information you need to obtain the performance required for your application. Keep this manual for future reference. The PowerDrive®Bluetooth®inverter is the first of its kind in the market! This inverter has high starting capability and max efficiency up to 90%. This Bluetooth® inverter can connect with all Andriod®and iOS® smartphones.
- LOAD PERFORMANCE CHART FOR THE 1000W PURE SINE WAVE DIGITAL POWER INVERTER This power inverter is pure sine wave inverter, it will perform good for most of the appliances. Please refer to below table for applications performance rating comparison of modified sine wave inverter and pure sine wave inverter. PERFORMANCE RATINGS Modified Sine Wave LCD/Plasma TV Standard TV Audio Eauipment Laotoo Desktop Comouter Microwave Table saw/Air Comoressor Hand Power Tool Coffeemaker. Toaster.
WARNINGS, CAUTIONS AND NOTES It's very important that any operator and installer of this inverter read and follow all WARNINGS, CAUTIONS AND NOTES and all installation and operation instructions. In particular, comply with WARNINGS (possibility of serious injury or death), CAUTIONS (possibility of damage to the inverter and/or other equipment), and NOTES (included to assist you in achieving the maximum performance and longest working life from this advanced-design inverter).
APPLIANCE CAUTIONS • DO NOT plug in battery chargers for cordless power tools if the charger carries a warning that dangerous voltages are present at the battery terminals. • Certain chargers for small nickel-cadmium or nickelmetal-hydride batteries can be damaged if powered by this inverter. Two types of appliances are susceptible to damage: Small, battery-operated appliances such as flashlights, cordless razors and toothbrushes that plug directly into an AC receptacle.
PowerDrive recommends installing one ANL type fuse and fuse holder close to the positive battery bank terminal. This fuse protects the batteries from accidental DC cable shorts, which can cause batteries to explode. ANL fuses and fuse holders are available at most hardware supply stores. Powerdrive accessories available.
appliance requires to start up (starting load) and it's continued running power requirements (continuous load). Power consumption is rated in watts, or it can be calculated from Amperes (Amps). This information is usually stamped or printed on most appliances and equipment. If this information is not indicated on the appliance or equipment, check the owner's manual. For .
FEATURES 1. Positive Power Input Terminal. 2. Negative Power Input Terminal. 3. High-Speed Cooling Fans. When the temperature inside the inverter exceeds a preset limit, the cooling fan automatically turns on to cool the inverter. When the temperature reduces, the fan turns off. 4. Ground Terminal. 5. Green LED: Battery voltage indicator. 6. Yellow LED: Output power indicator (KW), which will be activated when actual output power larger than 1000W. 7.
Sizing the Battery To determine the minimum battery bank Ampere-hour rating that you will need to operate appliances from the inverter, and any DC appliances powered by the battery bank. Follow these steps: 1. List the maximum wattage that the inverter has to provide (as above). 2. Estimate the number of hours the appliances will be in use between battery recharges. This will vary depending on appliances.
If there is any doubt about sizing the battery bank, it is safe to over estimate the Amp hour requirements of the battery bank. Note: The type of batteries you use to power your high-power inverter is important. Operating a high-power inverter . will routinely discharge batteries and they will require frequent recharging. Batteries used to start engines are not designed to repeatedly charge and discharge. We recommend using "deep-cycle" or "marine" rated batteries.
5. Fasten the inverter to the mounting surface using corrosion-resistant fasteners sized #10 or larger. CONNECTING THE INVERTER This inverter has two DC cable connections, one positive and one negative. The order of steps in the following procedure minimizes the danger of sparking near the battery bank. 1. Prepare all cable set ends with ring terminals at the battery ends. 2. Install one fuse holder with fuse on the Positive cable close to the battery bank end. 3.
NOTE: Sparking is normal for the first connectic;,n. 1. Make sure you have good secure connections Do not over-tighten. 2. If you need the information on the panel at a distance, you can take out the panel and connect it to a 12' extension cord (included) or simply use the APP. REMOVABLE FACEPLATE REMOTE CONTROL (1) Remove the screws fixing the panel (Keep the screws safe) (2) Follow the diagram below to connect the panel and extension cord. OPERATION 1.
NOTE: • When using an extension cord from the inverter to an appliance the extension cord should not be longer than 50 feet. TELEVISION AND AUDIO SUGGESTIONS Although all PowerDrive inverters are shielded and filtered to minimize signal interference with your television picture may be unavoidable, especially in weak signal areas. Here are some suggestions that may improve reception: 1. First, make sure that the television antenna produces a clear signal under normal operating conditions.
TROUBLESHOOTING PROBLEM: No Input Voltage cause Solution Battery is defective Replace battery. Blown fuse Lose cable connections Ask for help from technician. Check the connection to the battery. Tighten as required.
PROBLEM: Low Battery Alarm on all the time cause Solution Input voltage below 11 Volts - buzzing sound Poor or weak battery condition. Inadequate power being delivered to the inverter or excessive voltage drop Keep input voltage above 11 Volts to maintain regulation. Recharge or replace battery. Use lower gauge (heavier) cable. Keep cable length as short as possible. PROBLEM: TV does not work Cause Solution Contact TV manufacturer to find out if the TV is compatible with a modified sine wave.
SPECIFICATIONS Model Input Output Outout Freauency Output Waveform Continuous Power Surae Power Efficiency No Load Draw Low Batterv Shutdown USB Outout Port USB-C Output Port AC Output Socket Internal Fuse/ Reolacement Fuse Operatina Temo Battery Low Alarm Power Cable Lenath Dimensions Net Weiaht . PDIPS1000B 11-15V DC 115V AC 58-62Hz Pure Sine Wave (PSW) 1000W 2000W 85% Max <0.6A 10.5t 0.3V DC 2.4A 3.0A (15W) 2 Standard North American Sockets 5-30A blade fuse (reolaceable) Ideally 32°F-104°F 11 t 0.
FCC STATEMENT This equipment has been tested andfound to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, If not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The POWERDRIVE Inverter App can be installed and used on smartphones with Andriod or IOS. Supports Andriod 4.2 or above. Supports 1OS 7 .0 or above.
.t:21 PM .t:21 PM Not connected Not connected A'l'IT1' DEVICES DEVICES .....• Searching I Photo 3 .
(1) Please ensure the Bluetooth~ on your phone is ON . (2) Click the icon on the screen to activate the APP (Photo 1) . (3) Click the 11 CONNECT11 icon (Photo 2). (4) Your phone will automatically search for the inverter (Photo 3). Click the device name to set up the connection (Photo 4). (5) Your phone will ask you to key in a code to set up the connection. The default code is "8888". (6) Once the connection has been made, all 4 working modes are available to use (Photo 5) .
(1) On occasions the Andriod phone will be unable to detect the inverter in the App. If this happens, go to the Bluetooth page on your phone's 11Settings11 to pair with the inverter (2) If your Andriod phone has Bluetooth 4.0 or above, you will see two devices in the Bluetooth page, one with an "L" in its name and one without. Always select the one without the 11 L11 in its name in your Andriod phone (Photo 6).
(1) Open the App. (2) Click the "CONNECT" icon (Photo 8). (3) Click the name of your inverter, your smartphone and inverter are now disconnected. To avoid other people c onnecting with your inverter by mistake. 4;21 PM 4;21 PM 1500W 1500W ( X SITTINGS INVEllTEllALAAM *a, CONNECT oO SETTINGS l& STATUS TESTING PHONE ALARM Of > LOW/OVER VOLTAGE PROTECTION {;1f ) LOW NOISE MOOE F■n WI~ tun II low •P"d Wllh low riolae mode Mltcltd Only Hilct lhiJ mode w1lll ICM outpul ~ 111\d/or ambtan1 tem
1500W < RESET THE PASSCODE X PIHr.e key in tM existing paucode. Ijxxxx it Pleue key in che new passcode. II 11lxxxx Please ~ey In rhe new ~sKode again Ilxxxx [I £tit-, II I I Photo 12 (1) Click the "SETTI NGS 11 icon (Photo 10). (2) Click the "Reset the passcode" and proceed to follow the instructions in Photos 11 & 12.
Photo 13 (S01) Photo 14 (S02) Photo 15 (Battery voltage) (1) Ensure your inverter is connected with a battery successfully. (2) Turn off the inverter. (3) Press and hold the ON/OFF switch for 5 seconds. You will see the digital display flash "S01" twice (Photo 13), then flash 11S0211 three times (Photo 14). Finally, it will show the voltage of the battery (Photo 15). (Do not let go of the ON/OFF switch until you see the digital display show the battery voltage.
The inverter can be used in a distance from the battery. POWERDRIVE PD1000 POIPS10008 P01500 P02000 LENGTH 8AWG 8AWG 8AWG 6AWG 4AWG 2AWG 2AWG 2AWG 2AWG 2AWG Ht 2ft 3ft 4ft 5ft 6ft 7ft 8ft 9ft 10ft 8AWG 6AWG 6AWG 4AWG 4AWG 2AWG 2AWG 2AWG 2AWG 2AWG 8AWG 8AWG 8AWG 6AWG 4AWG 2AWG 2AWG 2AWG 2AWG 2AWG POSOOO 6AWG 4AWG 4AWG 2AWG 2 AWG 1 '0AWG 2/0AWG 3/0AWG 3/0AWG 3,0AWG 4AWG 4AWG 2AWG 2AWG 2AWG 1/0AWG 2/0AWG 3/0AWG 3/0AWG 3/0AWG 200A 300A RECOMMENDED FUSE SIZE AMPERAGE 100A 150A ~~1:v~:~l;l\i!i~~~;
DAS COMPANIES, INC. POWERDRIVE™ ONE YEAR LIMITED WARRANTY This Limited Warranty covers this PowerDrive™ product. This product is warranted against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase ("Warranty Period"). This warranty extends only to the original purchaser and will end when the product is transferred to a subsequent owner.
benefits conferred by DAS’s One Year Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations. How to obtain Warranty Service? Within the first thirty (30) days after the original purchase, products must be returned to the dealer. After thirty (30) days and for up to one (1) year the product may be returned to PowerDrive. When returning products to PowerDrive: Shipping to PowerDrive must be paid by you.
