User manual

© 2013 Dynamic Services International Inc. PowerCom Division. All Rights Reserved. ǀ 1-212-997-2000ǀ www.PowerComARS.com Page 8
10.0 WRS97x Data Format and
Command Lists
The Base Station data format, command lists, and
associated microcode are proprietary to PowerCom.
People who wish to develop their own applications
may purchase the PowerCom RF1 WRS970 API. This
is a software developer’s toolkit that includes the
necessary communication drivers for the base station.
11.0 PowerCom® HID Base Station
Model Number: WRS970-DSIH, WRS971-DSIH
PowerCom® offers HID compliant base stations. With
these new PowerCom base stations, no need to load a
USB driver anymore, you just have to connect the
base to your computer and start using the software.
Both has 2.4 GHz frequency hopping spread spectrum
(FHSS) transceivers. Frequency Synthesized. One
PowerCom RF1 Base Station per 500 keypads of the
same channel identity in a room. 31 RF Base Station
identifiers allows up to 15,500 pads per room.
12.0 Software
PowerCom is PowerPoint Add-in software available for
RF1 keypad and it can be installed for Office 2007,
Office 2010 and Office 2013.
Please contact [e-mail] or visit our website
www.powercomars.com for more information about
PowerCom software.
13.0 Accessories
Call PowerCom for information on available
storage/shipping cases, extra cables or power supply
kits for PowerCom RF1 system.
14.0 Limited Product Warranty
Limited Product Warranty
PowerCom warrants its serial components for a
period of 24 months from the date of
manufacture for any material or workmanship
defect in the product. This warranty does not
extend to batteries or any product component,
which has been subjected to misuse, neglect,
accidental breakage, improper installation, use
outside of present guidelines, or alteration
outside of our factory.
PowerCom Base Stations and Keypads use
internal antennas built directly on the printed
circuit board. Modifying the antennas in any way
will result in reduced range and will void the
warranty.
There are no user serviceable parts inside
PowerCom Base Stations or Keypads. PowerCom
agrees to remedy, at the factory, any product
defect, or at its discretion, replace any
component or part of the product provided the
owner complies with the following procedures:
1. The owner is to determine that the
problem is not the battery or a faulty or
improper connection with the personal
computer or power source.
2. The owner will contact PowerCom during
standard hours Monday through Friday
9:00 AM to 6:00 PM Eastern Standard
Time at:
212-997-2000 or [e-mail]
to obtain a Return Material Authorization
(RMA) number prior to shipping the
product back to the factory.