USER MANUAL PowerCom Mini WRS7000DSI-5
Copyright 2013 Copyright 2013 Dynamic Services International Inc. PowerCom Division. All rights reserved. Licensed software products are owned by PowerCom® and are protected by United States copyright laws and international treaty provisions. Fleetwood Group, Inc. manufactures PowerCom Mini for Dynamic Services International Inc. on OEM base. The relevant products are covered by U.S. and foreign patents, issued and pending.
Table of Contents 1.0 PowerCom Mini ................................................................................... 1 1.1 Introduction ............................................................................................................................... 1 1.2 Applications/Advantages ........................................................................................................... 1 1.3 RF Communication ....................................................................................
1.0 PowerCom Mini 1.1 Introduction This product consists of wireless (RF) keypads and a Base Station. The system is generally used to record answers to multiple choice questions as part of a classroom presentation, decisionmaking session, focus group, or videoconference. It offers methods for collecting and immediately reporting group response data. PowerCom Mini is a cordless handheld response system that provides numeric data interaction for meeting or learning environments.
world! With Interactive PowerPoint Presentation software in nine languages, PowerCom® provides the highest quality audience response systems for international businesses. Recognized by Microsoft as a Partner, PowerCom is the most respected Interactive Presentation Software developer in the business. We guarantee that we provide the lowest priced ARS packages and rental service in the world! For more information on these products or our customization capability, please visit our website at www.powercomars.
Note: Due to the properties of signals operating at 2.4 GHz, we does not recommend placing any walls between the base station and the keypads. The material in a wall tends to absorb the RF signal and some reduced performance might be observed. 4.0 How to Use the PowerCom Mini (WRS7000-DSI-5) battery warning is the red LED will blink quickly 4 times. If the keypad is unable to send the vote after period of 9 seconds, the Red Led will light to indicate the transfer was unsuccessful.
6.0 Keypad Settings Retrieval 6.1 Keypad locally To verify what settings the keypad has, press the 1 and 5 key simultaneously for 3 seconds. Either the red or the green led will light to start a sequence of blinks representing the Base ID and keypad address. A green LED flash represents the numerical values separated by red LED indicator.
PowerCom Base Stations and Keypads use internal antennas built directly on the printed circuit board. Modifying the antennas in any way will result in reduced range and will void the warranty. There are no user serviceable parts inside PowerCom Base Stations or Keypads. PowerCom agrees to remedy, at the factory, any product defect, or at its discretion, replace any component or part of the product provided the owner complies with the following procedures: 1.
13.0 FCC/IC Compliance This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device. 14.
15.0 Technical Specifications 7 © 2013 Dynamic Services International Inc. PowerCom Division. All Rights Reserved. | 1-212-997-2000 | www.PowerComARS.
16.0 Troubleshooting Procedures ISSUE Keypad does not turn on Poor RF Performance Short range with keypads Keypad vote not sending POSSIBLE CAUSE SOLUTION Battery may be inserted backwards. Check that the positive side of the battery is touching the coin cell retainer. Battery is dead. Replace the battery. Base not in open area. Do not place the base inside cabinets.
17.0 Index A S Accessories, 4 Service, 4-5 Software, 4 Static Mode, 3 B Batteries, 4 I T Technical Specifications, 7 Troubleshooting, 8 Interface, 4 P Patent information, ii PowerCom Products, 1 R V Voting, 3 W Warranty, 4 Return Parts, 5 RF Communication, 1 RF Performance, 6 9 © 2013 Dynamic Services International Inc. PowerCom Division. All Rights Reserved. | 1-212-997-2000 | www.PowerComARS.
