Specifications

CONFIDENTIAL

Removing the Front Bezel Cover

1. Remove the chassis cover

(refer to

Chassis Cover Removal/Installation

on page 6).

1. Remove the main logic board protector plate on the closed side of the chassis by removing the four

securing screws and placing the plate aside

(refer to

Figure 2: Removing protective plate

on page 7).

2. Remove the six screws that secure the bezel to the front of the computer (

see

Figure 3: Removing

retaining screws

on page 8).

All of these screws must be removed before the front bezel can be

removed. The screws are located on the inside of the chassis frame:

¥ one is on the top left end of the chassis

¥ one is in the left middle of the chassis

¥ one is on the bottom left end of the chassis

¥ one is on the top right end of the chassis

¥ one is in the right middle of the chassis

¥ one is on the bottom right end of the chassis

Gently pull the bezel directly forward to disengage. Lay the bezel face down directly in front of the chassis.

3. Disengage the wiring between the chassis and the front bezel.

Front Bezel Removal/Installation

Figure 2: Removing protective

plate

retaiing screws

Front Bezel