Specifications

CONFIDENTIAL

Removing 5.25-inch Drives

1. Remove the chassis cover (refer to Chassis Cover Removal/Installation on page 6).

2. Disconnect all cables that are attached to the device being removed (see Figure 12: CDROM

Removal on page 24).

3. Remove the four screws securing the drive to the drive cage.

4. Slide the drive forward out of the chassis.

Installing 5.25-inch Drives

1. Slide the drive half way into the front bay location, making sure the cable connections are facing the

rear of the computer. Pushing the drive in only halfway makes cable connection easier by giving more

maneauvering room behind the drive.

2. Connect the cables to the drive. Slide the drive in the rest of the way, making sure that the drive

is flush with the front of the computer.

5.25-inch Drive Removal/Installation

Figure 12: CDROM Removal

Power Connector

SCSI Connector

Sound Connector

Power Supply