Specifications

CONFIDENTIAL

Removing the 3.5-inch Drive

1. Remove the chassis cover (refer to Chassis Cover Removal/Installation on page 6).

2. Remove all cables from the drive.

3. Remove the four retaining screws securing the drive to the mounting bracket.

4. Lower the drive out of the bracket straight down and out of the bracket.

Installing the 3.5-inch Drive

1. Place the drive in the mounting bracket.

2. Secure the drive to the bracket with four retaining screws.

3. Attach all necessary cables to the drive.

4. Reset the CUDA

(refer to CUDA Reset on page 4).

5. Install the chassis cover (refer to Chassis Cover Removal/Installation on page 6).

3.5-inch Drive Removal/Installation

Figure 11:

Removing a

3.5-inch

3.5-inch internal

drive bay