Specifications

CONFIDENTIAL

Installing the PCI Riser Card

1. Lower the PCI riser card squarely into the PCI slot so that the notch in the PCI card lines up with the

notch in the PCI slot. Slide the contacts straight into the PCI slot and make sure the contacts are firmly

seated. When properly seated, the contacts on the bottom should not be visible.

2. Replace the support cross beam and its retaining screw.

3. Replace the screws that attach the PCI riser card to the support beam.

4. Reconnect the power cable of the CPU cooling fan. Route the cable so it does not contact the

chips on the RAM DIMMs.

5. Reset the CUDA

(refer to CUDA Reset on page 4).

6. Install the chassis cover (refer to Chassis Cover Removal/Installation on page 6).