User`s guide

Installing PCI Expansion Cards

For Technical Support, Call 1-800-708-6227

PowerCenter Pro User’s Guide

6. Push the card into the slot until it is ﬁrmly seated.

Do not force the card. If you feel a lot of resistance, pull the card out,

realign it, and insert it again.

• The tongue and screw hole on the slot cover should line up with the

slot and the screw hole on the chassis.

• Replace and tighten the screw you removed from the slot cover.

7. If your system is a Minitower, replace the base.

8. Replace the computer cover, tighten the thumb screw(s), and re-

connect everything.

CAUTION:

Be careful not to get any cables caught in the cover or the fan

housing when you put it back on the computer.

WARNING! To prevent electrical shock, always replace the cover before turning on

the computer.

5 Install card Page 69 Friday, June 6, 1997 9:51 AM