User`s guide

Installing PCI Expansion Cards

For Technical Support, Call 1-800-708-6227

PowerCenter Pro User’s Guide

4. Gently place it on its left (as viewed from the rear) side and rotate it

so that the base faces you.

5. If you have a Minitower chassis, remove the four Phillips-head

screws from the corners of the base and put them where you will be

able to ﬁnd them later.

These Phillips-head screws are for the base only; don’t use the Phillips

screws for the cover, or the thumb screws for the base.

6. Remove the Minitower base and set it aside.

base

Phillips-

head screws

5 Install card Page 63 Friday, June 6, 1997 9:51 AM