User`s guide

Getting Started
For Technical Support, Call 1-800-708-6227 PowerCenter Pro User’s Guide
3
2. Set the 115/230 volt switch to the correct setting for your country.
Set the switch to 115 volts for the U.S., Canada, and Japan. Use the 230-
volt setting in most European countries.
3. Connect the socket end of the power cord to the power input socket
on the back of the computer.
4. Connect the plug end of the power cord into a grounded, three-hole
electrical outlet. If you have any expansion cards, follow the
instructions in Chapter 5,
Installing PCI Expansion Cards, on page 59
to install them now.
Connecting the monitor
Your computer can be used with a wide variety of monitors.
The basic system comes with built-in video circuitry and 2 MB of Video RAM.
A 4 MB VRAM video card is also available as an upgrade option from Power
Computing.
Video memory configurations on page 110 lists the various monitor
sizes, resolutions, and number of colors supported for both the 2 MB and 4 MB
video cards.
1 Get Start Page 3 Friday, June 6, 1997 9:36 AM