User`s guide

184 CD-ROM ToolKit Reference Guide

If you are not getting any sound, verify the following:

Table 8:

Check Detail

Is your volume high enough?

• Is it high enough on the remote control?

• Is it high enough in the Sound Control Panel under Sound Out?

(internal CD-ROM drives with internally connected speakers only)

• On an external CD-ROM drive, is the external volume control, if any,

turned high enough?

Is sound output connected to your system?

• Headphones plugged into your CD-ROM drive

• Speakers plugged into your CD-ROM drive OR

• Internal speakers internally connected

Is a CD-ROM device driver enabled? CD-ROM ToolKit comes with a high performance device driver. See Chapter 4

for more information.

Is Sound enabled in the Control Panels? This

applies to internal CD-ROM drives with internally

connected speakers only.

1. Click on the Option … button in Sound In.

2. Choose the CD icon as your source of output.

3. Enable the Playthrough checkbox.

4. In Sound Out, select an output device and specify 16 bit, Stereo

and 44.100kHz.

Is the CD you are trying to play an audio CD? CDT Remote will play only audio CDs, such as traditional audio, multimedia,

and Enhanced CDs.

Do you have Apple CD Audio CD Player in your

Apple Menu Items folder?

This may conﬂict with CDT Remote. You might try backing it up and

removing it from your system.

Do you have more than one CD-ROM drive? Choose Select Device from CDT Remote’s Player menu and select the

appropriate CD-ROM drive.