User`s guide

Chapter 3: How To Use CDT Remote 179

How To Use CDT Remote

Overview

Some initial facts

CDT Remote is designed to look like a standard remote control for a home

stereo. To use it you need the following:

The Apple CD Audio Player may conﬂict with CDT Remote and prevent it from operating

correctly. The Installer tries to disable it. If you still have problems with it, you may want to copy

it to a diskette for safe keeping and remove it from your system. Apple CD Audio Player is

usually stored in the Apple Menu Items folder in your System Folder. If you don’t ﬁnd it there,

use Find File to locate it.

Table 6:

Requirement Detail

Sound output

• headphones plugged into your CD-ROM drive

• external speakers plugged into your CD-ROM drive OR

• for internal CD-ROM drives: internal speakers connected

internally

Enabled CD-ROM device driver CD-ROM ToolKit comes with a high performance device driver, see

Chapter 4 for more information.

Enabled Sound in the Control Panels

This pertains only to internal CD-ROM drives

with internal speakers connected internally.

1. Open the Sound Control Panel.

2. Click on the Alert Sounds popup menu and select Sound In.

3. Make sure Built In is selected.

4. Click on the Options … button.

5. Choose Internal CD as your input source.

6. Enable the Playthrough checkbox.

7. In Sound Out, select an output device and specify 16 bit,

Stereo, and 44.100kHz

NOTE