User`s guide

Chapter 1: Quick Start 167
1
Quick Start
This chapter provides a minimal outline for how to install CD-ROM ToolKit.
Since CD-ROM Toolkit comes installed on your startup drive, you should not
have to install it unless it has become damaged or been deleted
In the online manual found on the
Power CD
in the Bundled Software folder
under CD-ROM Toolkit, you will find a complete guide to installation in the,
CD-ROM Toolkit User Guide , in Chapter 3, Installing CD-ROM ToolKit .
If the system software has been damaged or the startup disk has been replaced,
you should go to the
System Software Installers
folder on the
Power
CD
and follow the instructions there to re-install the system software
Installing CD-ROM Toolkit
What follows is a quick start version of the installation instructions. For more
detail on installing CD-ROM toolkit, consult the online CD-ROM Toolkit
User’s Guide , Chapter 3, Installing CD-ROM Toolkit .
To install CD-ROM Toolkit software:
1. Restart your computer with extensions and virus protection off (by hold-
ing down the Shift key).
2. Turn off all virus protection software.
3. Insert the Power CD in the CD-ROM drive and close it.
4. Double-click on the
Power CD
icon.
5. Double-click on the
System Software Installers
folder.
6. Double-click on the
CD-ROM Software
folder.
7. Double-click on the
CD Software Toolkit Installer
icon.
8. Click Continue on the opening Installer screen.