Manualshelf

Specifications

ManualsBrandsPowerCenter ManualsComputer equipmentMinitower 132
12345678910
CONFIDENTIAL
9
Installing the Front Bezel
1. Connect the necessary wires to their respective ports on the main logic board.
2. Line up the two tabs on the bottom with the chassis and push them in until they click. Lift the
top edge of the bezel and line up the tabs with the chassis. Press the top edge of the front bezel
until the tabs click into place.
3. Replace the chassis cover (
refer to
Chassis Cover Removal/Installation
on page 6).
Figure 2: Disengage
Bezel Tabs
Bezel Tabs
RAM