Specifications

CONFIDENTIAL

Removing the Front Bezel Cover

1. Remove the chassis cover (

refer to

Chassis Cover Removal/Installation

on page 6).

2. Disengage the top three tabs that secure the bezel to the front of the computer (

see

Figure 2:

Disengage Bezel Tabs

on page 9).

All of these tabs must be disengaged before the front bezel can

be removed. The tabs are located on the inside of the chassis frame:

¥ one is on the top left end of the chassis

¥ one is on the top right end of the chassis

¥one is on the back of the chassis front panel, next to the power switch assembly

3. Disengage the bottom two tabs that secure the bezel to the front of the computer (

see

Figure 2:

Disengage Bezel Tabs

on page 9).

Both of these tabs must be disengaged before the front bezel

can be removed. The tabs are located on the inside of the chassis frame:

¥ one is on the inside left end of the chassis

¥ one is on the inside right end of the chassis

4. Lay the bezel face down directly in front of the chassis.

5. Disengage the wiring between the chassis and the front bezel.

Front Bezel Removal/Installation