Specifications

CONFIDENTIAL

Removing the Chassis Cover

1. Shut down the computer and turn off all external devices. If you do not have a grounding strap,

leave the computer plugged into the wall socket. Leaving the computer plugged in ensures a

positive ground. Disconnect everything but the power cord.

2. Remove the large thumb screw from the rear of the computer

(

see

Figure 1: Removing the

page 6).

3. Gently pull the levers on the bottom corners of the cover outward. Slide the cover straight back

toward the rear of the machine, lift it off and set it aside.

Installing the Chassis Cover

1. Standing at the front of the machine, slide the cover forward until the levers on the back corners lock

into place. Make sure the tabs on the front of the cover go under the bezel.

Chassis Cover Removal/Installation

Figure 1: Removing the

chassis cover

thumb screw

Side Panel