Specifications

CONFIDENTIAL

¥ the first screw is located above and to the left on the chassis

¥ the second screw is located below and to the left on the chassis

¥ the third screw is located above and to the right on the chassis

¥ the fourth screw is located right below the power plug

3. Connect the power connectors to all internal SCSI devices.

4. Connect the logic board power connector to the MLB.

5. Move the 3.5-inch drive cage back into position (

refer to 3.5-inch Drive Removal/Installation on

page 20).

6. Reset the CUDA. (refer to CUDA Reset on page 4).

7. Install the chassis cover (refer to Chassis Cover Removal/Installation on page 6).