Specifications

CONFIDENTIAL

Removing 5.25-inch Drives

1. Remove the chassis cover (refer to Chassis Cover Removal/Installation on page 6).

2. Disconnect all cables that are attached to the device being removed. (see Figure 12: CDROM

Removal on page 22).

3. Remove the front bezel (refer to Front Bezel Removal/Installation on page 8).

4. Push in the tabs of the side rails and slide the drive forward out of the chassis.

Installing 5.25-inch Drives

1. Slide the drive half way into the front bay location, making sure the cable connections are facing the

rear of the computer. Pushing the drive in only halfway makes cable connection easier by giving more

maneuvering room behind the drive.

2. Connect the cables to the drive. Slide the drive in the rest of the way, making sure that the drive

is flush with the front of the computer and the side rails snap into place.

5.25-inch Drive Removal/Installation

Figure 12: CDROM Removal

Power Connector

SCSI Connector

Sound Connector

Main Logic Board