SDS

3
if it contacts the skin. As a precaution, remove clothing and shoes if contaminated. Flush skin
with plenty of water for at least 15 minutes, wash skin with soap and water. Wash or clean
contaminated clothing and shoes before reuse.
INGESTION:
No specific first aid measures are required because this material is not expected to be harmful
if swallowed. Do not induce vomiting. As a precaution, give the person a glass of water or milk
to drink and get medical advice. Never give anything by mouth to an unconscious person. Get
medical attention if discomfort occurs.
INHALATION:
If exposed to excessive levels of material in the air, move the exposed person to fresh air. Get
medical attention if coughing or respiratory discomfort occurs.
NOTE TO PHYSICIANS:
In an accident involving high-pressure equipment, this product may be injected under the
skin. Such an accident may result in a small, sometimes bloodless, puncture wound. However,
because of its driving force, material injected into a fingertip can be deposited into the palm of the
hand. Within 24 hours, there is usually a great deal of swelling, discoloration, and intense
throbbing pain. Immediate treatment at a surgical emergency center is recommended.
5. Fire Fighting Measures
FIRE CLASSIFICATION:
Classification: (29 CFR 1910.1200): Not classified by OSHA as flammable or combustible.
FIRE COMMENT:
Leaks/ruptures in high pressure systems using materials of this type can create a fire hazard
when in the vicinity of ignition sources (eg. open flame, pilot lights, sparks, or electric arcs).
FLAMMABLE PROPERTIES:
Flash Point: (COC) 356F (180C) Min.
Auto ignition: NDA
Flammability Limits: (% by volume in air): Lower: N/A Upper: N/A
Extinguishing Media: CO
2
, Dry Chemical, Foam, Water Fog
NFPA rating: Health 0; Flammability 1; Reactivity 0.