manual

POWER BOX Evolution 40/16

- 10 -

Sockets for

external LEDs

4. Specification

Operating voltage: 4.0 to 9.0 Volts

Power supply: Two 5-cell NiCd or NiMH batteries

Two 2-cell LiPo batteries, 7.4 Volt

Current drain: approx. 70 mA

Voltage drop: approx. 0.25 V

Max. receiver current: 2 x 10 A (stabilised)

Servo sockets: 16 sockets, 5 channels

Max. continuous current: 20 A

Temperature range: -10°C to +75°C

Dimensions: 91 x 65 x 19 mm (incl. base plate)

Weight: 100 g

SensorSwitch: 15 g

5. Connections, Controls

The two receiver batteries are connected via the pair of integral high-current

sockets. In theory the PowerBox 40/16 Evolution will also work with a single

battery, but if you do this you forfeit the extra security of a dual-battery power

supply.

If you have to make up your own battery connecting leads, please take great care

to avoid reversed polarity, as this would immediately destroy the battery backer’s

voltage monitor circuits.

High-current sockets

with retaining clips

for Battery 1 and

Batter

Five connecting

leads to the

receiver

Voltage monitor (LED

chain), Battery 1 and

Battery 2

Base plate with

mountin

holes

Sockets for 16 servos

and 5 remotely

accessed channels