User manual PowerBox Professional
18 PowerBox-Systems − World Leaders in RC Power Supply Systems
Note: if you are only using one valve for all the wheel doors, you can by-
pass the last ve points by selecting OK.
All the settings are now complete, and you will see one nal safety query:
Move your transmitter switch to the “gear down” position. It will now take a
few moments for the Assistant to create the necessary tasks, and move the
doors to the correct position without any fouling or jamming.
If the timing (pauses, opening times and closing times) is not exactly as you
wish, you can change the settings manually at any time.
Select the EXPERT MENUE point in the DOORSEQUENCER menu and you will
see this screen display:
In the Expert Menue, the sequencer does not constrain you to use pre-set
modes, forcing you to adopt xed, pre-determined vectors for retracting and
extending the undercarriage.
The PowerBox door sequencer offers innumerable options, because the mo-
deller has the freedom to dene each step in terms of travel, sequence and
timing. For example, all the wheel doors can be set to open or close at entirely
different speeds. It is also possible to set up multiple forward-and-back se-
quences. If the full-size aircraft features a “jerk” when the legs lock, that can
also be simulated. The opening and closing processes can be set up entirely
individually and independently of one another.