Instruction Manual
www.powerbox-systems.com
13
6. TELEMETRY
Once you have created a new model and bound one or
more receivers, you can display important information
on the main screen using the telemetry widgets.
To create a widget, touch an empty area of the main
screen, and you will see the following display:
You will now see twelve grey elds, together with a P+ button and a P- button. The P+ button can be used to
create additional pages, so that more telemetry widgets can be displayed. You can move to and from between
the pages by swiping with your nger. The P- button is used to erase empty pages.
Touch one of the grey elds, and this screen display
appears:
You can select any of four different types of widget:
- Telemetry
- Servo values
- Timer
- Quick-select menu
Telemetry
This can be used to display all the sensors connected to
the P²BUS, and show the data they generate. This infor-
mation also includes the receiver and transmitter data.
If you select the Telemetry widget type, this screen dis-
play appears:
The left-hand column shows all the connected sen-
sors, while the right-hand column shows all the values
which these sensors supply. The P²BUS is an in-house
development, and is capable of transmitting up to 255
sensors each with 32 individual values – and at a speed
of up to 800 values per second!
It is possible to set up each widget to display multip-
le sensor values, even from different sensors; these
values are then displayed in turn by the widget. This is
accomplished by selecting one or more sensor values
which you want your widget to display, then conrming
your choice with OK.
A list of the selected sensor values is displayed. You
can use the + button to select additional values from
another sensor.
At this screen display you can adjust the size of the widget using the Small, Medium and Large buttons. The
Erase widget function can be found at bottom left.