Instructions for use Powerbox Light Controller LightBox SR
8
PowerBox-Systems − World Leaders in RC Power Supply Systems
Explanation of functions:
Solid Light: Switchable continuous light, typically used for landing lights or cockpit
illumination
Flash Light: Flashing light, typically used for navigation lights or stroboscopic ef-
fects
Beacon Light: Rotating light function, simulating a rotary beacon
Afterburner: Simulated afterburner
Various settings are available, depending on the function you select:
ON/OFF Setpoint: the switching point is set here. For example, if you wish to switch
on the landing light together with the landing aps using only one channel, you can
select the switching point in such a way that the landing light only comes on when
the aps are deployed.
Channel: this function is only displayed if you have selected a serial input signal.
In this mode a different channel can be assigned to each function; this makes it
possible to switch all four outputs on and off independently of each other.
ON/OFF Time: this function is used with the ashing light function, and controls the
duration of the light bursts, and the interval between them.
Speed: denes the speed of rotation of the rotary beacon.
Reverse: at this point you can set the range in which the output is active, i.e. below
or above the Setpoint (switching threshold).
All the settings are automatically stored immediately, and are executed in real time.
This means that you can see the result of any changes by observing the lighting
system itself.