Instructions for use Powerbox Light Controller LightBox SR

PowerBox-Systems − World Leaders in RC Power Supply Systems

6. TECHNICAL DATA

Operating voltage RC- Input: 4.0 V – 9.0 V

Power supply ext. Akku: 2.5 V – 13.0 V

Current drain, running: 19 mA

Current drain, stand-by: 150 μA

Switched channels: 4

Maximum current load: 1.2 A per channel

Maximum current load: 4.0 A total

Signal input: PWM or serial

Dimensions: 58 x 19 x 15 mm

Weight incl. patch-lead: 22 g

Temperature range: -30 °C to +75 °C

Note: if the receiver is powered by a stabilised voltage (e.g. from a PowerBox

battery backer), the Cut Off Voltage is set at a point about 0.3 V – 0.4 V below

the stabilised voltage. For 5.9 V this would be a Cut Off Voltage of 5.6 V. How-

ever, a long power cable to the LightBox SR may necessitate a lower cut-off

threshold.