user manual
2 PowerBox-Systems − World Leaders in RC Power Supply Systems
Dear customer,
we are delighted that you have selected the SparkSwitch PRO from Power-
Box-Systems.
The SparkSwitch PRO is the logical development of the original SparkSwitch, which
has been successful in the market since its introduction in 2008. The SparkSwitch
PRO combines acknowledged reliability with new telemetry transmission options.
The SparkSwitch PRO incorporates a genuine bi-directional infra-red connection
which physically isolates the receiving system from the ignition circuit, but at the
same time sends telemetry information from ignition and engine to the telemetry
interface via a light signal. This eliminates the danger of interference or static char-
ge from the ignition circuit reaching the receiver.
The ignition switch is ready for immediate use, without any adjustment work. All
you have to do is select the appropriate telemetry system using the USB interface
adapter or the BlueCom adapter.
A two-position switch is required at the transmitter.
Please read through these instructions, as they will help you become familiar with
your new accessory as speedily as possible.
We are condent that you will thoroughly enjoy using the PowerBox SparkSwitch
PRO.
Specication
- Input voltage 4.0 – 13.0 V
- Regulated or open output voltage: 5.9 V / battery voltage
- Max. output current 2 A, peak 4.5 A