User manual PowerBox Sensor 6V-7.8V MPX-MPX V3

www.powerbox-systems.com 9
6. REGULATOR ERRORS
The unit constantly monitors the operation of the voltage regulators. If the output
voltage strays outside the correct value, the LEDs indicate this by lighting up violet
and ashing rapidly. Regulator errors typically occur when a battery is connected
with reversed polarity.
If this should happen, please contact our Service department!
7. SPECIFICATION
Operating voltage: 4,0 V – 9,0 V
Power supply: 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMh
Current drain, operating 30 mA
Current drain, stand-by: 10 μA
Peak current capacity: 2 x 10 A
Drop-out voltage: 0,25 V
Output voltage: 6,0 V/ 7,8 V stabilised
Supported telemetry system: P²BUS
Dimensions: 65 x 26 x 11 mm
Weight: 30 g
Temperature range: -30 °C to +105 °C