Instruction Manual PoWErBox 12
Dear customer, congratulations on your decision to buy the PowerBox 12 - the switch backer! This compact product combines the performance features of our safety switch and a powerful battery backer in a single case which will fit in virtually any model. 1. LAY-OUT AND CONNECTIONS The actual enclosed switch is fitted with four floating-mount double contacts. Only the positive conductor of each pair is switched; all the negative terminals are connected together for additional security.
. INSTALLATION Please do not throw away the inner packaging immediately, as it includes a template for marking the switch aperture. Even though our product is very well protected from the effects of vibration, the switch should always be mounted in a part of the model relatively low in vibration. Please note that the GRP fuselage sides of a large power model are not suitable, as they are always subject to considerable vibration.
5. SPECIFICATION Voltage range: Power supply: Output voltage: Current load: Dropout voltage: Dimensions: Weight: Temperature range: EMV approval: CE approval: WEEE Reg. No. 4.0 – 9.0 Volt 2 x 5s NiMH/NiCd, 2s LiPo, 2s LiFePo equal to the input voltage Peak 2 x 6A 0.3V 65 x 23 x 23 mm 35g -30° C to +75° C EN 55014-1:2006 2004/108/EG DE 639 766 11 6.
7. SERVICE NOTE We are anxious to offer good service to our customers, and to this end we have set up a Support Forum which deals with all queries concerning our products. This relieves us of a great deal of work, as it eliminates the need to answer frequently asked questions time and again. At the same it gives you the opportunity to obtain help quickly all round the clock - even at weekends. All the answers are provided by the PowerBox Team, guaranteeing that the information is correct.
8. GUARANTEE CONDITIONS At PowerBox-Systems we insist on the highest possible quality standards in the development and manufacture of our products. They are guaranteed “Made in Germany”! That is why we are able to grant a 24 month guarantee on our PowerBox 12 from the initial date of purchase. The guarantee covers proven material faults, which will be corrected by us at no charge to you.
9. LIABILITY EXCLUSION We are not in a position to ensure that you observe our instructions regarding installation of the PowerBox 12, fulfil the recommended conditions when using the unit, or maintain the entire radio control system competently. For this reason we deny liability for loss, damage or costs which arise due to the use or operation of the PowerBox 12, or which are connected with such use in any way.
12/2020 PowerBox-Systems GmbH Ludwig-Auer-Straße 5 D-86609 Donauwoerth Germany +49-906-99 99 9-200 +49-906-99 99 9-209 www.powerbox-systems.
