User manual Powerbox Teleconverter S-BUS 2

www.powerbox-systems.com 5
If congured as PowerBox sensor, the following data can be transmitted:
- Battery voltage, battery 1 and battery 2
- Residual capacity, battery 1 and battery 2
- Number of Fades, RX1 and RX2
- Number of Lost Frames
- Number of Fail-Safe events
If the Teleconverter is plugged into a Royal SRS with GPS, the following GPS data
can also be received:
- 3D speed
- Altitude
- 3D distance
- Distance covered
- GPS positional data
For software updates you also need to start by selecting the Teleconverter tab;
after this click on Continue, and then on Software update.
5. SET CONTENTS
- Teleconverter
- Two 3-pin male connectors
- Operating instructions