User manual Powerbox Teleconverter S-BUS 2

2 PowerBox-Systems − World Leaders in RC Power Supply Systems
1. PRODUCT DESCRIPTION
The PowerBox Teleconverter provides a means of connecting any PowerBox with
a telemetry output to a Futaba S-BUS2 telemetry system. All you have to do is
register the Teleconverter at the transmitter, like a standard sensor.
2. REGISTERING THE TELECONVERTER AT THE TRANSMITTER
The Teleconverter does not need to be registered to Futaba transmitters. Simply
select the „PowerBox“ sensor for Slot 8 in the Sensor menu. By default the Tele-
converter occupies slots 8 – 23.
You only need to register the Teleconverter if you wish to move it to different slots.
This is accomplished by connecting it to the transmitter with a battery prior to
registering it.