User manual PowerBox Competition SR2

www.powerbox-systems.com 35
13. SPECIFICATION
Operating voltage 4.0 V - 9.0 V
Power supply 2S LiPo, 2S Lilon, 2S LiFePo, 5S NiMH
Current drain, operating 260 mA
Current drain, stand-by 30 µA
Maximum current capacity 2 x 20 A continuous (<30 s: 2 x 40 A)
Drop-out voltage 0.3 V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input Serial
RC systems supported PowerBox, Futaba, Jeti, Spektrum,
M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo outputs, total 22
Servo signal resolution 0.5 µs
Signal repeat rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro modes Heading mode, Normal mode
Gyro sensor type External iGyro SAT
Number of sensor axes 12
Telemetry systems supported P²BUS, S.BUS2, EX-Tele, SRXL2,
M-Link, Hott
Dimensions 107 x 69 x 19 mm
Weight 115 g
Weight, Sensor-Switch 15 g
Temperature range -30 °C to +75 °C
14. SET CONTENTS
- PowerBox Competition SR2
- TFT-Display
- SensorSwitch
- 2 patch-leads
- 8 retaining screws
- 4 rubber grommets and brass sleeves
- Operating instructions