PowerBox Evolution Dual Power Supply User Manual with Switch
www.powerbox-systems.com 9
4. SPECIFICATION
Operating voltage: 4.0 Volt to 9.0 Volt
Power supply: 2 x 5-cell NiCd or NiMH batteries,
2 x 2-cell LiFe batteries (A123)
2 x 2-cell LiPo/LiIon batteries, 7.4 Volt
Current drain: Switched on: approx. 80 mA
Switched off: approx. 4 µA
Dropout voltage: approx. 0.25 V
Max. receiver/servo voltage: 2 x 10 A (stabilised), according to cooling measures
Peak 2 x 20 A
Servo sockets: 16 sockets, 6 channels
Temperature range: -30°C to +75°C
Dimensions: 93 x 67 x 19 mm (incl. base plate)
Weight: 86 g
Sensor-Switch: 15 g
EMV approval: EN 55014-1:2006
CE approval: 2004/108/EG
WEEE Reg. No.: DE 639 766 11
Registered design: DE 203 13 420.6
This battery backer fulls the EMV protective requirements, EN 55014-1:2006
with certicate dated 10th February 2009. EMC approval 2004/108/EG.
The unit must not be connected to a mains PSU!