User manual PowerBox Mercury SRS with OLDED Screen and GPS

PowerBox-Systems − World Leaders in RC Power Supply Systems

A single Task contains the following information:

Here is an example which demonstrates how the system works:

UP » DOWN: all the tasks which you set up with this direction are carried out when the

retract switch on the transmitter is moved to the “Extend” position.

In our example we have selected door sequencer output 3. The servo runs from

the START POSITION: 1152µs (right-hand servo end-point) to the STOP POSITION:

1830µs (left-hand servo end-point).

The servo only starts moving 1.0 seconds after the switch is operated, and the transit

time is 3.0s (difference between 1.0s and 4.0s).

DOWN » UP: all the tasks which you set up with this direction are carried out when the

retract switch on the transmitter is moved to the “Retract” position.

In this example the servo immediately starts moving when the switch is operated (start

time 0.0s), and moves from the left servo end-point (1830µs) to the right end-point

(1152µs) within 3.0 seconds.

Value Range

Task number 1 - 12

Extend or retract undercarriage UP » DOWN / DOWN » UP

Servo number 1 – 6

Servo START position 700µs – 2300µs

Servo STOP position 700µs – 2300µs

Start time 0 – 25.0s

Stop time 0 – 25.0s