User manual PowerBox Mercury SRS with OLDED Screen and GPS

www.powerbox-systems.com 25
10. ADDITIONAL FUNCTIONS AND SET-UP FACILITIES
10.1. Flight recorder
You can access the RF-Flight recorder display by briey and simultaneously pressing
buttons I and II on the SensorSwitch:
ANT. FADES: this item displays the lost data packets for the individual receivers or
satellites.
LOST FRAMES: this value shows the occasions when none of the receivers connected
to the system was able to deliver a valid data packet.
HOLDS: this value is incremented when none of the receivers connected to the system
was able to supply a valid signal for a period longer than 250 ms. In this case the ser-
vos move to the Hold or Failsafe positions set in the PowerBox.
10.2. Flight time reset
The main screen displays the elapsed ight time. You can use this timer to keep track
of the power-on time, and reset it every time you recharge the batteries. The time is
reset by simultaneously pressing buttons I and II on the SensorSwitch; hold both but-
tons pressed in until the screen displays the message RESET.
FM3: TORQUE ROLL
Aileron: 100% ATT.ASSIST: on
Elevator: 100% ATT.ASSIST: on
Rudder: 100% ATT.ASSIST: on
The model’s set-up is now complete, although manual ne adjustment is still possible
at any time: either by manual intervention in Gyro Settings, or by assigning a Gain
channel for individual axes. The latter enables you to ne-tune individual axes accura-
tely in the air.