User manual PowerBox Mercury SRS with OLDED Screen and GPS

www.powerbox-systems.com 23
9. TEST FLY ASSISTENT
Once you have completed all the points listed above, it is time to carry out test-ights
with the iGyro. Even though the Mercury version of the iGyro only requires one rotary
knob or slider for the adjustment process, we recommend carrying out the procedure
on the ground several times until you are condent that you know how to complete
the process. Note that previous settings are overwritten every time you carry out this
point. Just to be sure, please check the direction of effect of the gyro functions once
more before you y the model.
From the main menu select the TEST FLY ASSISTANT point.
The Mercury SRS carries out a self-calibration of the gyro sensors, and resets the ma-
ximum permitted control surface travels. In the next screen display you are requested
to move all the transmitter sticks to both end-points. When you have done this, conrm
by selecting OK.
At the next screen you must move the ight mode switch to FM2, and set the gain
control to 0%.
As soon as you have done this, the Mercury SRS skips to the set-up screen display.