User manual PowerBox Mercury SRS with OLDED Screen and GPS

20
PowerBox-Systems − World Leaders in RC Power Supply Systems
Operate the appropriate transmitter switch, and the PowerBox automatically detects
it as the switch which you have assigned to the retract system. The on-screen arrows
should now be located in front of UP/DOWN. If you nd that your retract switch works
in the wrong “sense” (direction), correct it by reversing that output at the transmitter.
Press the SET button again to proceed.
The door sequencer’s method of working is determined in the following menu:
The following sequences are available:
Mode 1:
Extend undercarriage:
Open wheel doors
extend undercarriage
Retract undercarriage:
Retract undercarriage close wheel doors
Mode 2:
Extend undercarriage:
Open nosewheel doors
extend nosewheel
Open main wheel doors
extend main undercarriage close main wheel doors
Access the PowerBox’s Door Sequencer menu, and select the SETUP ASSISTANT
point. You will now see the following screen display: