User manual PowerBox Mercury SRS with OLDED Screen and GPS

PowerBox-Systems − World Leaders in RC Power Supply Systems

Dear customer,

We are delighted that you have decided to purchase the PowerBox Mercury SRS po-

wer supply from our range.

We hope you have many hours of pleasure and great success with your PowerBox

Mercury SRS.

Product description

The PowerBox Mercury SRS is a new power management system which combines

all the experience and ndings we have gained over the last few years, together with

customer requests, in a single compact unit. Never before has so much functionality

been crammed into such a small space! The Mercury SRS is ideal for any application

requiring an airborne system which provides an uncompromising level of high perfor-

mance. Integral iGyro, dual battery, dual receiving system, telemetry, door sequencer

and servo matching are just a few of the highlights which this small, lightweight device

provides.

Introduction

These instructions explain how to install the Mercury SRS in the model and set it up

with the help of the Assistants. Working through the individual steps in the Assistants

completes most of the programming for the model; all that remains is to set up the

auxiliary functions and ne-tune the servos using the servo-match function. Naturally

it is also possible to set up all the functions of the Mercury SRS manually, i.e. without

using the Setup Assistant. All the menu points are explained individually in the latter

part of these instructions.

1. USING THE UNIT FOR THE FIRST TIME

Any pilot who has experience using a PowerBox will immediately feel ‘at home’ with

the method of operating the Mercury SRS. The device is operated in the usual way

with the help of a menu system displayed on the OLED screen, and the ON / OFF

switch.