user manual
www.powerbox-systems.com 9
d) Failsafe
This menu is used to select an output which will move to a pre-dened servo
position if the radio signal is lost. Always use this function for Throttle. It is a
legal requirement in many countries!
Select the output you wish to use, and set the Failsafe mode to Failsafe. Pres-
sing the Teach button stores the current servo positions for all outputs for which
Failsafe has been set.
3. GYRO SETTINGS
None of the iGyro settings have a function unless an iGyro SAT is connected. The
procedure differs according to whether the model is new, or has already been test-
own without a gyro:
a) A new model
- Set all model functions including a channel for gyro gain
- Set up all model functions (travel, centre, Expo, etc.)
- Test-y the model, including trims, differential etc.
- Assign the gyro outputs
- Learn the installed position
- Learn the centre and end-points
- Adjust the iGyro in ight using the gain control
- Fine-tune the individual axes if necessary
- Store the established gain value on a switch