user manual

8
PowerBox-Systems − World Leaders in RC Power Supply Systems
2. BASIC SETTINGS
If you are not using an iGyro with the PowerBox Pioneer, only a few settings have
to be entered. You will nd all the settings either in the transmitter menu (CORE,
Jeti) or the Mobile App and the PC program.
To access the menu on the PowerBox CORE transmitter, create any Telemetry
widget for the Pioneer; you will then nd the Menu button in the widget. On a Jeti
transmitter you will nd the Jetibox point under Additional functions. Se-lect this
point, then select MX at far right. If you now press at the bottom, you will nd your-
self in the Pioneer menu again.
a) Frame rate
This menu point allows you to set the servo signal repeat rate. If you are using
older analogue servos, use the 18 ms setting. For more recent digital servos the
12 ms setting can be selected.The default setting is 16 ms.
b) Capacity reset channel
The purpose of this function is to select the channel you wish to use for reset-
ting consumed battery capacity; the default setting is Channel 16. This channel
resets the consumed capacity as soon as the travel exceeds 100 %. You can
use a switch or button for this and reset the capacity every time you charge the
batteries.
c) Reset Gyro
Selecting this function resets all gyro settings.
Caution: there is no security query for this function!