user manual
www.powerbox-systems.com 7
Connecting an iGyro SAT
If you wish to exploit the Pioneer’s gyro functionality by tting an iGyro SAT, it is
essential to install the unit at the correct angle in the model.
In turbinepowered models the iGyro SAT should be located as far as possible
from the engine in order to prevent turbine noise inuencing the sensor. The lead
attached to the iGyro SAT can be extended to any length. The iGyro SAT should be
connected to the Pioneer’s FastTrack input.
Connecting the GPS for the gyro
Use a Y-lead to connect the GPS III to the FastTrack input together with the iGyro
SAT. The GPS III automatically detects that it is connected to a FastTrack input.
The GPS III has two functions when connected to the Pioneer:
1. The iGyro operates with speed compensation. This means that the gyro gain for
all axes is adjusted to suit the model’s airspeed. This increases the gyro’s sensi-
tivity when the model is ying slowly, thereby improving its stability.
2. The GPS telemetry data are sent to the transmitter; this applies to all systems.
Connecting the USB or BlueCom™ Adapter
Plug the USB or BlueCom™ Adapter into the Data input. For ease of access this in-
put is located separately on the top of the case. The BlueCom™ Adapter draws
current from the Data output, and therefore requires no additional power supply.
The adapter can be plugged in at any time – even when the system is operating.
Now start the App on the smartphone or your PC. You can download the Power-
Box Terminal App to your PC from our website. Mobile Terminal is available from
the corresponding App Store for Android or iOS.