Operation Manual

Armadillo 9X Sweeper #4100033 Rev. D 07/15

Page 86

TROUBLESHOOTING CHART

PROBLEM POSSIBLE CAUSE(S) SOLUTION(S)

Loss of dust control. Debris in hose or impeller inlet. Clean.

Broom skirts or seal worn. Replace.

Skirt clearance from oor exceeds

.125 in (0,32 cm).

Adjust clearance.

Dust control lters clogged. Clean lters.

Filter seals worn or missing. Replace.

Poor seal with vacuum gasket. Visually check and adjust, if

necessary.

Sweeper unit leaving debris. Hopper full. Dump hopper.

Broom(s) out of adjustment. Adjust.

Broom bristles worn. Check broom for wear and

adjustment.

Poor performance of broom drive

mechanism.

Check for jam in broom chamber.

Broom lift arms hung up with

debris.

Clear out debris.

Hopper aps damaged or missing. Replace or adjust clearance.

Hopper out of adjustment. Check hopper clearance.

Dust control lters clogged. Clean lters.

TROUBLESHOOTING