Operation Manual

© 2014-2015 Minuteman International, Inc.
Armadillo 9X Sweeper #4100033 Rev. D 07/15
Page 76
Hopper Filter Removal (Dual Filter)
1. Release the latch on the hopper cover and raise
the cover.
2. Disconnect the wire harness connector leading
to the lter shaker motor.
3. Unscrew the four wing nuts (each having one
conical washer and an isolator) securing the lter
retainer bars to the hopper.
4. Remove the shaker motor assembly and lter
retainer bars.
5. Lift out the panel lter.
Filter removal steps are the same for both lters.
PREVENTATIVE MAINTENANCE
SHAKER
MOTOR
ASSEMBLY
WING
NUTS
MOTOR WIRE
HARNESS
CONNECTOR
PANEL
FILTER