Operation Manual

Armadillo 9X Sweeper #4100033 Rev. D 07/15

Page 32

HIGH DUMP

The two far left levers on the front of the control panel

are used to raise the hopper to any height up to 60 in

(1,5 m) and dump it.

LEVER 1

Raises and lowers the hopper.

LEVER 2

Rotates hopper to dump debris, and returns (rotates

back) the hopper to it’s starting position.

MACHINE OPERATION

DEBRIS HOPPER DUMP CONTROLS

HOPPER FILTER SHAKER BUTTON

This button is used to activate the lter shakers prior to

dumping or as needed during sweeping operation. It is

located to the left hand side of the instrument panel.

To shake the lter:

1. Bring the machine to a complete stop.

2. Place the broom control lever in the OFF

position.

3. Press and release the lter shaker button, it will

run automatically for 20 seconds.

4. Place the broom control lever in the ON position

and resume sweeping.

CAUTION

Do not leave the hopper in the RAISE position

for an extended period of time.