Case Study
The purpose of this experiment was to learn how concrete
would cure underneath three dierent blanket types. The
three types were (A) Powerblanket® Curing Blanket with the
heat turned ON, (B) Powerblanket® Curing Blanket with the
heat turned OFF, and (C) standard curing blankets.
To determine how each section of concrete cured, sensors
were embedded inside the slab, the sensor lead was run to
the outside of the formwork, and a digital datalogger was
attached to each lead.
The Ultimate Custom Heating Solution
Experimental Setup
Closeup of sensor lead attached to reinforcing
steel prior to placement.
Closeup showing the routing of sensor leads
through the side forms
Concrete Curing Case Study