Full Product Manual

ROOFING SOULTIONS
FOR REVERE ROOFING
SUMMARY
Cold. It can shut down projects, ruin
product and lead to costly delays. This
is most apparent in the roong industry,
where dropping temperatures solidify
spray adhesive and create a backlog of
unnished projects while waing for the
weather to improve.
Ohio-based Revere Roong, a licensed
roong contractor with a proven tack
record of quality work in commercial
roong, has been in this situaon me
and me again. Winter pushes through
its March expiraon date, enduring well
into Spring. In April of 2019, Revere
WITH POWERBLANKET
UNLIKE CONVENTIONAL INSULATED BLANKETS AND BAND HEATERS,
POWERBLANKET HAS DEVELOPED THE BEST HEAT DISTRIBUTION
SOLUTIONS TO HEAT BUCKETS AND PAILS EVENLY AND CONSISTENTLY.
CASE
STUDY
In April 2019 we started using more spray
adhesive for single ply membranes. It’s a 40
pound cylinder. Most people will be going
that direction because of huge time savings,
but it is temperature sensitive. Using
Powerblankets keeps it at the necessary
temperatures.
ISAAC WHITE, PRESIDENT
Roong employees were eager to try out a new spray adhesive for
single-ply membranes, allowing jobs to be nished faster. However,
the weather was sll too chilly to try out the spray adhesive, which
needs to be kept at or above 70° F. The company began searching for
heang opons so they could power through the cold.
THE POWERBLANKET SOLUTION
Revere Roong discovered Powerblanket’s bucket heaters.
“We started looking around and Powerblanket came up,” said Isaac
White, President of Revere Roong. “We had talked with a distributor
and they had menoned it. We bought several through a distributor.

Summary of content (2 pages)