Case Study

Richard started looking for a better approach to his company’s curing needs and came across
Powerblanket. When he read what our industrial heating blankets could do, he reached out to
a representative to learn more.
A Simple Solution to a Complex Problem
“When Richard contacted us, it was obvious that he needed something far less
expensive and time consuming than his present method,” the Powerblanket sales
rep said. “I discussed with him the details of our epoxy-curing blankets, and he
was excited to try them out. What started with a two-foot-by-two-foot test blanket
quickly snowballed into many more orders.”
Richard and his team soon found that the Powerblanket curing solution worked exceptionally
well and eliminated the need for the pre-built ovens they had spent so much time building.
Instead of using an oven to increase the heat of the ambient air around the project, all they
had to do was apply the adequate number of Powerblanket curing blankets and then wait
for the joints to cure. With a thermostatic controller on each blanket, they could dial in the
proper temperature and not worry about watching to make sure it stayed there. And with the
Powerblanket patented technology, the right amount of heat distributed evenly through the
entire application - increasing the speed of the cure by leaps and bounds.
Gold Coast Case Study