Owner's Manual

CONTROL PANEL LAYOUT

Fig.2 Panel Layout

NOTE: Panel Layout and Controls may differ by model.

1. HIGH/LOW INPUT

Use this Low Level 4-pin Molex style input is where the wiring harness plugs in for the Low Level input that

connects to source units with RCA line level outputs. A source unit with a minimum input of 250mV is required

for proper operation. However, this input can accept levels up to 10Vrms.

2. AUX Input Jack

This 1/8-inch (3.5mm) mini jack can be used to accept an MP3, iPOD or smartphone as the source unit from

that device's headphone (3.5mm) output.

3. GAIN Control

This control is used to match the input sensitivity of the ampliﬁer to the particular source unit that you are

using up to 10 volts.