User Manual

PARTS
41
4111-0001 — Oct.2007
Item Quantity Part Number Description
A 1 0595-____
1
Lip, Welded Assembly
B 1 7823-____
2
Plate, Inspection
C 1 9515-____
1
Platform, Welded Assembly
D 1 9202-0003 6’ x 1-1/8” Pin, Lip Hinge, 2002 and Older
1 9202-0014 6-1/2’ x 1-1/8” Pin, Lip Hinge, 2002 and Older
1 9202-0006 7’ x 1-1/8” Pin, Lip Hinge, 2002 and Older
1 9202-0050 6’ x 1” Pin, Lip Hinge, 2003 and Newer Pin
1 9202-0051 6-1/2’ x 1” Pin, Lip Hinge, 2003 and Newer Pin
1 9202-0052 7’ x 1” Pin, Lip Hinge, 2003 and Newer Pin
E 1 0015-____
1
Toe Guard Welded Assembly, Left
F
1 8435-____
1
Frame, Standard
1 8435-____
1
Frame, CleanPit
G 1 2101-0039 Nylon Lock Nut, 5/16-18 UNC
H 1 9222-0382 Lockout Strap, Maintenance Prop
J 1 2101-0163 Washer, 5/16 in., Flat
K 1 2101-0012 Cap Screw, 5/16-18 UNC x 1-1/4 in.
L 3 9202-0002 Rear Hinge Pin
M 6 2101-0047 Cotter Pin, 1/4 x 2 in.
N AR 2101-0039 Nylon Lock Nut, 5/16-18 UNC
P AR 2101-0011 Cap Screw, 5/16-18 UNC x 1 in.
Q 2 5275-0001 Toe Guard Linkage
R 2 0142-0004 Toe Guard Strut
S 6 2101-0089 Cap Screw, 3/8-16 UNC x 2.0 in.
T 12 2101-0060 Washer, 3/8 in., Flat
U 6 2101-0040 Nylon Lock Nut, 3/8-16 UNC
V 1 0015-____
1
Toe Guard Welded Assembly, Right
W 1 0523-0023 Lip Lifter
X 1 1751-0010 Decal, Model/Serial ID
Y 2 2101-0046 Cotter Pin, 1/4 x 1-1/4 in.
Z
1 9225-____
1
Prop Rod, Standard Only
1 9225-____
1
Prop Rod, CleanPit Only
AA 1 0015-____
1
Toe Guard Pivot
Frame and Platform
AR = As Required
1
Provide dock leveler serial number, platform size, and lip size when calling or faxing orders.
2
Provide length and width of inspection plate opening when calling or faxing orders.