User Manual

19
Manual No. 4111-0027
Sept. 2009
May 2012
19
INSTALLATION
NOTE DESCRIPTION
1
Top of base plate and bumper cover plate to be flush with top of ramp plate.
2
Apply continuous bevel weld across both bumpers and length of base plate.
3
To figure ramp plate length, need 12” ramp for every 1-1/2” of rise to ramp.
4
To install formed angle, see formed angle installation instructions.
Securely block or support ramp and lip when in vertical positions. Lack of proper bracing can result in ramp dropping during adjustment or installation causing personal injury or damage to unit.
2X
Junction
Box